The Eliminator

Meltdown is a multiplayer, super action game, which challenges your stamina, agility and reaction.Not One but two specially designed, low impact spinning arms will knock the players off the podium.Jump over the pipe or dive under it and at the same time stay in place and not fall or you will be eliminated. The last standing player will be the winner of The Meltdown.
The inflatable base is made in the form of octagon. It has 8 removable green podium.

Inflatable

• Made in Taiwan.
• Material used for inflatable is TPU and not PVC.
• Stitched on Japanese JUKI machines with nylon thread
• We have a double stitching everywhere, with a four-fold sewing on the lower stress point
• Double stitch inside and outside, and do reinforced strips at the bottom of the joint and each corner to make sure the inflatable is strong enough.
• 30 x 30 x 5 Feet octagonal inflatable is made up of0.55 mm, 1000D TPU
• Base material: 700 grain/m²
• Dimension: 9m x 9m x 1.5 m
• Air Pump: 1100 Watt high duty air pump

Why TPU and not PVC?

Thermoplastic polyurethane (TPU) is more practical than PVC because of lightweight, more elasticity and durable nature of TPU over PVC. And we at jumpking India are selling TPU made products. The Cutting of material is done on the laser cutter.

• Elastic and resistant to longitudinal bending;
• cold-resistant, good differing ability to shock recovery by the viscosity of the mold and bending strength
• Form stable and dimensionally stable weatherproof
• Resistant to oil, grease and zone
• Narrow bend radii at the hoses)
• Resistant to the effects of microbes and hydrolysis (and also to the action of salt water)
• Noise absorbing and vibration damping

Remote Control

• Power Switch: On-Off switch
• Operation Type: Manual or automatic Option switch
• Start Button
• Stop Button
• Speed control
• Timer start Button
• LED Timer screen
• Clockwise and anticlockwise Joystick controller for manual use.
• Red and Green indicator